DS-6700HUHI-K Series Encoder User Manual
63
Figure 7. 16
Scene Change Detection
2.
Select the
Camera
.
3.
Check
Enable
to enable scene change detection.
For the analog cameras, the line crossing detection and intrusion detection conflict with sudden scene change
detection. You can only enable one function. If you have enabled line crossing detection or intrusion
detection, when you enable sudden scene change detection and save the settings, the following attention box
pops up as below.
Figure 7. 17
Note
4.
Drag the slider to set the sensitivity value.
Sensitivity
: Range [1-100]. The higher the value is, the more easily the change of scene can trigger the
alarm.
5.
Click the
Arming Schedule
to set the arming schedule. Refer to
Step 6
in
Chapter 7.1.1
Configuring Motion
Detection.
6.
Click the
Linkage Method
tab to set the linkage methods. Refer to
Step 7
in
Chapter 7.1.1
Configuring