DS-6700HUHI-K Series Encoder User Manual
27
4.3.3
Setting/Calling a Patrol
Setting a Patrol:
1.
In live view mode, click the
from the PTZ control area to enter the patrol settings interface.
2.
Select a patrol number from the patrol list for settings.
Figure 4. 7
Patrol Settings
3.
Click
to edit the patrol.
4.
Click
to add patrol path.
Figure 4. 8
Add Patrol Path
5.
Configure patrol parameters, including the preset No., duration of staying for one preset and speed of patrol.
Preset:
determines the order at which the PTZ will follow while cycling through the patrol.
Time:
refers to the time span to stay at the corresponding key point. The time can be set from 1 to 30 sec.
Speed:
defines the speed at which the PTZ will move from one key point to the next. The speed can be set
from 1 to 40.
6.
Click
OK
to save the path to the current patrol.
7.
Repeat the above step 3 to 6 to add more patrol paths.
8.
(Optional) Click
to edit the existing patrol path, or click
to delete it.
9.
Repeat the above steps to configure other patrols.