DS-6700HUHI-K Series Encoder User Manual
53
To trigger an external alarm output when an event occurs, you need to go to the Alarm Output Settings
to set the related parameters. Refer to
Chapter 7.1.3 Configuring Alarm Output
for reference.
(4)
Select the channel you want to trigger recording when a motion detection event occurs.
Figure 7. 6
Motion Detection-Alarm Linked Recording
8.
Click
Save
to save the settings.
7.1.2
Configuring Alarm Input
Steps:
1.
Go to
Configuration> Event > Basic Event > Alarm
Input
to enter the Alarm Input Settings page.
2.
Select the
Alarm Input No.
3.
Select the
Alarm Type
. The alarm type can be NO (Normally Open) and NC (Normally Closed).
4.
Enter the
Alarm Name
.
5.
Check
Enable
Alarm Input Handling
.
6.
Click
Arming Schedule
tab to set the arming schedule for the alarm input. Please refer to
Step 6
in
Chapter
7.1.1 Configuring Motion Detection
.