DS-6700HUHI-K Series Encoder User Manual
26
Figure 4. 5
Set a Preset
3.
Use the PTZ control buttons to move the lens in the desired position. You can use any of the following
commands:
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
4.
Click
to finish the setting of current preset.
Up to 256 presets are configurable depending on the PTZ protocol applied.
Calling a Preset:
This feature enables the camera to point to a specified preset scene when an event takes place.
For the pre-defined preset, you can call it at any time to the desired preset scene.
In live view mode, select a predefined preset from the list and click the
icon to call a preset.
Linking to Alarm:
The preset can also be used to link to the alarm input when there is an alarm event occurring.
Figure 4. 6
PTZ Linking
Please refer to
Chapter 7.1.2 Configuring Alarm Input
for the PTZ Linking settings (
Configuration>Event>Basic
Event>Alarm Input>Linkage Method
).