DS-6700HUHI-K Series Encoder User Manual
13
Chapter 2
Activation
You are required to activate the encoder first by setting a strong password for it. Activation via Web Browser,
Activation via SADP, and Activation via Client Software are all supported.
2.1
Activating via Web Browser
Steps:
1.
Power on the encoder, and connect the encoder to the network.
2.
Input the IP address into the address bar of the web browser, and press Enter to enter the activation interface.
The default IP address of the network encoder is 192.0.0.64. You are recommended to change the default IP
address after your access.
Figure 2. 1
Activation
3.
Create a password and input the password into the
Password
text field.
STRONG PASSWORD RECOMMENDED
– We highly recommend that you create a strong
password of your own choosing (using 8-16 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we recommend that
you reset your password regularly, especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4.
Confirm the password.
5.
Click
OK
to save the password and then the window pops up as below.