DS-6700HUHI-K Series Encoder User Manual
32
If the device is connected to a public network, you should use a NTP server that has a time synchronization
function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is set up in a
more customized network, NTP software can be used to establish a NTP server used for time synchronization.
Configuring Time Synchronization Manually
Enable the
Manual Time Sync.
function and then click the
icon to set the system time from the pop-up
calendar. You can click the
icon to quickly select the time.
Figure 5. 5
Manual Time Sync.
You can also check the checkbox of
Sync. with computer
time
to synchronize the time with the local PC.
Check
Enable DST
to enable the DST function and set the date of the DST period.
Figure 5. 6
DST Settings
4.
Click the
Save
button to save the settings.
5.2.3
Configuring RS-232 Serial Port
The RS-232 serial port can be used in two ways:
Parameters Configuration: Connect a computer to the camera through the serial port. Device parameters can
be configured by using software such as HyperTerminal. The serial port parameters must be the same as the
serial port parameters of the camera.
Transparent Channel: Connect a serial device directly to the camera. The serial device will be controlled
remotely by the computer through the network.
Steps: