Heyer iTernIS ADV, Operator'S Manual

Page: 91 / 218

Menu | iTernIS ADV
7. 17
7.7 | Intra Hospital
Transport
Fig. 7-16 TIME OF USE
AND SOFT VERSION
window..
The
Intra hospital transport
option was intended to be activated during intra hospi-
tal transfer of patients that must continue to receive ventilation support. Specifica -
lly, for transfers during which the ventilator is supplied only with O
2
.
The Intra hospital transport function temporarily deactivate the Low air pressure
and Power loss alarm signals. This is designed to avoid overloading the alarm sig-
nals, which indicate conditions the user knows that are due to the transfer.
The function can only be activated when the air supply is missing. The
Intra Hospi-
tal Transport
activation mechanism is as follows:
• Shut down the wall O
2
supply (the ventilator temporarily ventilates with air only)
and remove the ventilator hose.
• Make the connections that feed the OXYGEN inlet into the ventilator from an O
2
tube.
• Shut down the wall air supply and remove the feed hose (this will trigger the Low
air pressure alarm signals).
• Complete the following sequence: [Menu]>>Intrahospital transport>>YES.
This will fully enable the Intra hospital transport. This function is deactivated when
the air pressure is restored in the rear panel AIR inlet or when the following is
executed:
[Menu]>>Intrahospital transport>>NO. While the option is active, the
ventilator displays low priority alarm signals to indicate that condition.