Heyer iTernIS ADV, Operator'S Manual

Page: 130 / 218

NEO-INF Operative modes | iTernIS ADV
10. 10
10.7.2 | Enabled complementary
functions
• Manual inspiration.
• Distal/proximal pneumotachograph.
This mode exists only in the NEO-INF category. This mode is time-cycled, and
inspiratory pressure can be regulated. It can operate with an adjustable continuous
flow.
During the entire respiratory cycle, the equipment drives a programmable flow
through the patient circuit. During the inspiratory phase, the ventilator limits the
inspiratory pressure with the expiratory valve.
In this mode, the programmed pressure determines the maximum limit it can reach.
Therefore, the PEEP addition does not change the maximum pressure peak obtai-
ned. This way, the TCPL mode in the
iTernIS ADV
ventilator adheres completely to
the classic programming style that this mode has followed for a long time.
Fig. 10-13
TCPL screenshot.
Fig. 10-14
Picture of the TCPL enabled controls, NEO-INF
category. Shown with the preset values for each.
The following list has complementary functions that can be selected as an option in
TCPL (for further details regarding their behavior, see the
Menu
chapter):
• %O
2
suction.
• Manual inspiration.
• Nebulization.
• Volume compensation.
10.7 | TCPL - Time-Cycled
Pressure - Limited
Ventilation
10.7.1 | Enabled ventilatory
parameters (preset values)