Heyer iTernIS ADV, Operator'S Manual

Page: 127 / 218

NEO-INF Operative modes | iTernIS ADV
10. 7
principles. It is, therefore, necessary to configure the PSV parameters to ensure
that support is present in spontaneous breaths.
•
Backup Ventilation
is disabled by default. In this case it must, at least, be ensured
that the patient will receive ventilation that is equal to the configuration of the
mandatory VCV. It can be enabled by configuring the Backup Ventilation line in
the MENU window.
Fig. 10-7
SIMV (VCV) + PSV mode screen in NEO-INF
patient category. The difference between VCV and support
pressure breaths is noticeable.
Fig. 10-8
Picture of the SIMV (VCV) + PSV enabled con -
trols, NEO-INF category. Shown with the preset values for
each.
The preset values of the tidal volume will depend on the configuration of the
IBW-
based VT
(see the
Start-up and Initial Calibration
chapter). Fig. 10-8 shows the
initial value that result from a
IBW-based VT
default configuration.
The following list has complementary functions that can be selected as an option
in SIMV (VCV) + PSV (for further details regarding their behavior, see the
Menu
chapter):
• %O
2
suction.
• Manual inspiration.
• Manual inspiratory/expiratory pause.
• Programmed inspiratory pause.
• Volume compensation.
• Leak compensation.
• Distal/proximal pneumotachograph.
10.4.1 | Enabled ventilation
parameters (preset values)
10.4.2 | Enabled complementary
functions