• Certificate Size — select the number of bits used for HTTPS encryption. The default is 1024 bits. Using
2048-bit encryption will cause a slight lag in RMI connections.
• Restricted Network Access — when On, disables all nonessential network functionality that is not required
for normal product operation. In most circumstances, leave this option On.
For IPv4, you can change:
• DHCP Address — when On, the library will request an IP address from a DHCP server each time the
device is booted. The default is On.
• Static Address — configures the IP address when DHCP is not enabled.
• Subnet Mask — configures the network mask of the library controller when DHCP Address is not On.
• Gateway Address — configures the gateway address when DHCP Address is not On.
• IPv4 DNS Server 1 and IPv4 DNS Server 2 — configures the addresses of up to two DNS servers when
DHCP Address is not On.
For IPv6, you can change:
• IPv6 DNS Server 1 and IPv6 DNS Server 2 — configures the addresses of up to two DNS servers when
DHCPv6 is not enabled.
• Stateless Addressing Enabled — when On, the library will generate an address for itself based on the
routing information obtained from a router advertisement and the MAC address. The library can manage
up to five global addresses at the same time, which can be assigned from different routers. The default is
On.
• DHCPv6 Addressing Enabled — when On, the library will request an IP address from a DHCP server each
time the device is booted. The default is Off.
• Static Addressing Enabled — when On, the library will use a statically configured address. The default is
Off.
• Static Assigned Address — configures the address when Static Addressing Enabled is On. You can select
the standard prefix,
FE80:
, or the prefix of a nearby router. Enter the remainder of the address and click
Add
.
To remove an IPv6 static IP address, click
Delete
next to the address in the
Current IPv6 Addresses
pane.
The Configuration > Network Management page
Use the
Configuration > Network Management
page to enable and configure SNMP. SNMP allows
applications such as HPE Systems Insight Manager to manage the device. The device supports both SNMP
configuration and SNMP traps. SNMP can only be configured with the RMI; it cannot be configured with the
OCP.
Command View TL TapeAssure provides comprehensive summaries and detailed information about the
properties, performance, utilization, and health of all tape drives and media for all monitored Hewlett Packard
Enterprise libraries. This data can be exported on demand or at scheduled times to a comma-separated
values (CSV) file for analysis with spreadsheet programs or custom scripts.
The Configuration > Network Management page
83
