manualshive.com logo in svg

Hewlett Packard Enterprise StoreEver 8096, User'S And Service Manual

Share
Download
Hewlett Packard Enterprise StoreEver 8096 User'S And Service Manual Download Page 228

Place the drive on a static-safe surface, noting its position in the library.

7.

Remove any additional tape drives following the same procedure.

Removing the power supply and library controller (MSL4048, MSL8048 and
MSL8096 only)

On the MSL4048, MSL8048 and MSL8096, the power supply and library controller are moved to the new
chassis.

Procedure

1.

Remove the power supply.

a.

Loosen the three captive thumbscrews on the power supply.

b.

Grasp a thumbscrew stem on each side of the power supply. Support the bottom while pulling the
power supply out of the library.

Figure 104: Removing the power supply

2.

Remove the library controller.

a.

Loosen the two blue thumbscrews on the library controller and remove it from the library.

228

 Removing the power supply and library controller (MSL4048, MSL8048

and MSL8096 only)

Summary of Contents for StoreEver 8096






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands