manualshive.com logo in svg

Hewlett Packard Enterprise StoreEver 8096, User'S And Service Manual

Share
Download
Hewlett Packard Enterprise StoreEver 8096 User'S And Service Manual Download Page 121

Procedure

1.

Load a firmware upgrade tape into the mailslot or any open slot. If all slots are full, remove a data tape to
make room for the firmware upgrade tape.

2.

From the Home screen, press 

Previous 

or

 Next

 until the screen displays 

Support

. Press 

Enter 

to select.

3.

Enter the administrator password if prompted.

4.

Press 

Previous

 or 

Next

 until the screen displays 

Drive FW Upgrade

. Press 

Enter

 to select.

5.

Press 

Previous

 or 

Next

 until the screen displays 

Drive FW Upgrade by Tape

. Press 

Enter

 to select.

6.

Press 

Previous 

or

 Next

 until the display shows the correct slot location of the firmware upgrade tape

installed in the device (example) 

FW Tape Location Slot: Mailslot

. Press 

Enter

 to select the correct

firmware tape location. The screen displays 

Upgrading Drive FW

.

When the update is complete, the screen displays either 

Success Export FW Tape

, or 

Failed Export FW

Tape

.

7.

If the upgrade failed, press 

Enter

 to display the error code and message describing the cause of the

failure.

8.

Remove the firmware upgrade tape from the library using either the mailslot or by removing the magazine
where the tape has been placed.

Viewing logs (Support > Library Error Log)

The library keeps a log of recent error and warning messages. See 

Error codes

 on page 166 for more

information about error codes.

Procedure

1.

From the Home screen, press 

Previous 

or

 Next

 until the screen displays 

Support

. Press 

Enter 

to select.

2.

Press 

Previous

 or 

Next

 until the screen displays 

Library Error Log

 to see error messages or 

Library

Warning Log

 to see warnings. Press 

Enter

 to select.

3.

Enter the administrator password, if prompted.

4.

Press 

Enter

 to see the message description. Press 

Cancel

 to return to the message code.

5.

Press 

Next

 to see the next message.

Downloading a support ticket (Support > Download Support Ticket)

A support ticket contains information that can help a system administrator or support engineer diagnose
library problems. Use this option to download a support ticket to a USB flash drive. Downloading the support
ticket to a USB flash drive lets you view the ticket on a computer that is not connected to the library.

You can view the support ticket with the Library & Tape Tools.

Procedure

1.

Insert a USB flash drive into the USB port on the back panel.

2.

From the Home screen, press 

Previous

 or 

Next

 until the screen displays 

Support

. Press 

Enter 

to select.

3.

Press 

Previous

 or 

Next

 until the screen displays 

Download Support Ticket

. Press 

Enter

 to select.

Viewing logs (Support > Library Error Log) 

121

Summary of Contents for StoreEver 8096






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands