2.
Mount the library in a rack.
a.
With assistance, slide the library onto the metal rails that are already in position in the rack.
b.
From the front of the library, secure the front bezel to the rack using a #2 Phillips screw driver placed
through the small holes in the mounting bracket to tighten the captive screws on each side of the
library.
Replacing the tabletop conversion cover
Procedure
1.
Set the replacement base chassis on a sturdy surface in front of the cover.
2.
Slide the chassis into the cover until the front panel of the chassis is aligned with the cover.
3.
Tighten the captive screws on the chassis front panel until the cover is secure.
Replacing the library components and cables
Replace the library components by reversing the removal procedures. Align the components carefully in the
guide slots. If the thumbscrews cannot be tightened easily, verify that the component is aligned properly.
Replacing the tabletop conversion cover
231
