Herz pelletstar CONDENSATION 10, Operating Instructions Manual

Page: 37 / 94

T-CONTROL 9
37
Term Description Unit
Scorch- /burn out
Displays system operation hours during burning, born down and burnout
phase
h
Boiler run time
Displays the boiler run time (=sum of nominal load-, modulation-, part
load- and burn down- /burn out phase)
h
Total
Display of the total operation hours of the system
(incl. Ready)
h
Total energy
produced
Display of the total energy generated by the system kWh
Operating hours 2
1
2
Operating hours until
inspection
Display Operating hours until inspection. Can be reset by entering a
code.
Information message "Maintenance" (error No.38) appears after the set
inspection interval has been exceeded (standard: 1000 operating hours).
h
Maintenance interval
date:
Display date until to next maintenance.
Information message "Service" (Error No. 39) appears after exceeding
the set maintenance interval (standard: 3000 operating hours) or after
exceeding the annual interval.
-
Maintenance interval
rest - operating hours:
Display rest-operating hours until to next maintenance h
Interval ash tray Display of the interval (emptying) of the ash tray h
pellet sucker
*only at Suction discharge
Display rest-operating hours until to next maintenance of pellet sucker. h
ignition fan*
Display rest - operating hours of the ignition fan until to next
maintenance of ignition fan.
h