Herz pelletstar CONDENSATION 10, Operating Instructions Manual

Page: 31 / 94

T-CONTROL 9
31
9.11 Module configuration
Boiler Buffer Hot water tank
Overview
Status
Settings
Operating hours
Inputs/Outputs
General settings Overview
Status
Settings
Agg-Test
Barrier times Overview
Status
Settings
Agg-Test
Circulation pump
Time program/Barrier times
Heating circuit Time mode Solar
Overview
Status
Operation modes
Settings
Agg-Test
Heating circuit curve
Time program / Barrier times Overview
Time program
Settings
Overview
Status
Settings
Agg-Test
Yield
Hydraulic compensator Net pump Zone valve
Overview
Status
Agg-Test
Barrier times Overview
Status
Agg-Test
Barrier times Overview
Status
Agg-Test
Barrier times
Ext.requirement Additional boiler
Overview
Status
Settings
Barrier times
Heat curve Overview
Status
Settings
Agg-Test
Barrier times
9.12 Terms and definitions
In this chapter all parameters and terms of the different modules are explained.
Some terms can be a display value and a setting value. To recognize these, they are
marked with a *.
◼
The term is a display value if aggregate test is inactive
→
the symbol of the
aggregate test is:
◼
If the aggregate test is active (by pressing the symbol the hand will change to
green and the aggregate test gets activated) the individual components can be tested
by pressing the control lamp. Now the term is a so-called setting value.