Herz pelletstar CONDENSATION 10, Operating Instructions Manual

Page: 34 / 94

9 T-CONTROL
34
Term Description Unit
Here the maximum boiler output is limited depending on the outside
temperature. Therefore, according to the example, the maximum boiler
output at outdoor temperatures < 0°C at the set output at Temp. 1
(100%). At outside temperatures > 20°C the maximum boiler output is the
set output at Temp. 2 (50%). A linear interpolation takes place in
between.
-
Settings
1 2
3
4 5
Number suction times /
barrier times
(at Suction discharge)
The desired suction times (1 - 6) / barrier times (1-2) for conveying the
pellets can be set here. 00:00-
23:59
Pressing the start button starts the suction process (even outside the
set suction / blocking times.
-
Settings
1 2 3
4
5
Mode
(at pointsuction via CAN)
Display of the currently set mode -
Storage room filled -
reset
Display of the state of the filling of the storage room -
Actual position Display of the current position -
Settings
1 2 3 4
5
Under pressure / ID-
fan correction nominal
load Correction of the negative pressure / ID fan in nominal-load operation
with the aid of the induced ID fan (observe air correction of the lambda
sensor).
-75-+75 %
Under pressure / ID
fan correction part load
Correction of the negative pressure / ID fan in part-load operation with
the aid of the induced ID fan (observe air correction of the lambda
sensor).
-75-+75 %
Mat. correction part
load Correction of the amount of material in part load operation by using the
stoker screw (observe material correction of the lambda probe).
-95-+95 %
Mat. correction
nominal load
Correction of the amount of material in nominal load operation by
using the stoker screw (observe material correction of the lambda
probe)
-95-+95 %
Overview of work / pause / suction in tabular form -
Menu "inputs / outputs" (system-specific)
In-/Outputs
1
2 3 4 5 6 7
Grate cleaning Indicates the state of the grate cleaning:
If switch on green
➔
Output active.
-
Ash door opened Indicates the state of the ash door.
If the indicator lamp lights up, the ash door is opened.
-
BFP flap open Displays the condition of the BFP flap Open:
If switch on green
➔
Output active.
-