Herz pelletstar CONDENSATION 10, Operating Instructions Manual

Page: 44 / 94

9 T-CONTROL
44
Term Description Unit
Active Heating time
mode
Indicates the actual operating mode -
Remote control
number
Display of the selected remote controller -
Balancing room
sensor
Setting the value (-5 to +5) for calibrating the room sensor -
Kneeling barrier over
room temperature
Activates the kneeling barrier over the room temperature -
Barrier over room
temperature
Activates the barrier over the room temperature -
Settings 2
1
2
3
Room set temperature Setting up required room temperature (15-30). °C
Kneeling temperature Setting up required room temperature (10-22) during lowering time. °C
Flow fixed
temperature Setting up the flow temperature (20 to maximum flow set temperature)
during the set heating time (operation mode “flow fixed”)
°C
Room influence Setting up the factor (0-10) of the room temperature influence. -
Correction
The correction is a factor for influencing or correction of the flow must
temperature:
▪
This value (-5 to +5) gets multiplied by 2 and added to the flow set
temperature
°C
Kneeling influence Setting up the factor (0-10) of the kneeling temperature influence. -
Settings 3
1 2
3
Switching temperature
Setting up the switching temperature (10-35). That´s the average daytime
temperature that conducts the switching between summer mode and
winter mode. The higher the value of the switching temperature is set, the
later the changeover to summer operation is carried out.
°C
Balancing outside
sensor
Adjusting the balancing of the outside temperature sensor (-5 - 5)
▪
Adjustment of the outside temperature sensor to the actual measured
outside temperature (e.g .: with reference thermometer)
°C
Hot water tank priority
Activate hot water tank priority (ON/OFF)
▪
The hot water tank is loaded prior compared to the heating circuit.
-
Kneeling barrier
Activation kneeling barrier (ON/OFF)
▪
The heating circuit is blocked in the case of durable kneeling or outside
the heating time.
-
Menu "Aggregate-Test"
Agg-Test
1
Heating circuit pump*
Indicates the state of the heating circuit pump:
▪
If the indicator lamp lights up, the heating circuit pump is running
-
Heating circuit mixer
OPEN*
Indicates the state of the heating circuit mixer:
If the indicator lamp lights up, the heating circuit mixer is open
-
Heating circuit mixer
CLOSE*
Indicates the state of the heating circuit mixer:
If the indicator lamp lights up, the heating circuit mixer is closed
-
Menu "Time program / Barrier times"
Time program
1 2 3