Henny Penny ROTISSERIE SCR-6, Service Manual

Page: 50 / 70

Henny Penny SCR-6/8
7-18. CONTROL BOARD
REPLACEMENT 1. Remove electrical power supplied to the unit.
Remove electrical power supplied to the unit by
unplugging the unit, or by turning off the wall circuit
breaker, or electrical shock could result.
2. Remove the Phillips head screws securing the control
side, side panel and remove side panel.
3. Pull connectors from board.
4. Using a 5/16" socket, remove the nuts securing the
control board and remove control board.
5. Install new board in reverse order, and restore power
to unit.
7-19. RELAYS The Solid State Relays receive messages from the
control board and operate the components in the
rotisserie. See wiring diagrams to help locate the
desired relay.
Checkout: 1. Remove electrical power supplied to unit.
Remove electrical power supplied to the unit by
unplugging the unit, or by turning off the wall circuit
breaker, or electrical shock could result.
2. Using a Phillips head screwdriver, remove the side
panel closest to the controls.
7-14 698