Henny Penny ROTISSERIE SCR-6, Service Manual

Page: 44 / 70

Henny Penny SCR-6/8
7-10. CAPACITOR REPLACE 1. Remove electrical power supplied to unit.
MENT - DRIVE MOTOR
Remove electrical power supplied to the unit by
unplugging the unit, or by turning off the wall circuit breaker,
or electrical shock could result.
2. Remove side panel closest to controls.
3. Disconnect wires from capacitor.
4. Remove the three Phillips head screws from the
capacitor, and remove capacitor from unit.
5. Install new capacitor in reverse order.
7-11. DOOR SENSOR 1. Remove electrical power supplied to unit
REPLACEMENT
Remove electrical power supplied to the unit by
unplugging the unit, or by turning off the wall
circuit breaker, or electrical shock could result.
2. Remove appropriate side panel.
3. For replacing the sensor on the control side, the
control panel and control box must be removed per
Section 7-14.
4. Using a 3/8" socket, remove the nuts securing the
sensor bracket, and remove bracket from unit.
7-8 698