Henny Penny ROTISSERIE SCR-6, Service Manual, Page: 47 / 70

Henny Penny SCR-6/8
7-14. RADIANT HEATERS
(continued)
4. Remove the wires from the terminals.
5. Remove screws from both support brackets, and pull brack-
ets and heater from unit.
6. Install new heater in reverse order.
7-15. CONTROL BOARD 1. Remove electrical power supplied to the unit.
“SPEAKER”
REPLACEMENT
Remove electrical power supplied to the unit by
unplugging the unit, or by turning off the wall circuit
breaker, or electrical shock could result.
2. Remove control side-side panel from unit.
3. Unplug the red connector from the board.
4. Using a Phillips head screwdriver, remove the two screws
securing the speaker and remove the speaker.
5. Replace with new speaker in reverse order.
698 7-11