Assembly
66
1
2
3
Figure 4-12: Condenser bracket (Glassware set G3 and G6)
1
Support rod
3
Boss head clamp
2
Condenser clamp
Version glassware set G3 and G6:
1.
Push the boss head clamp (3) onto the support rod (1) and position with the clamping
screw.
2.
Place the condenser clamp (2) around the condenser and attach on the support rod
by using the clamping screw.
▪
Position the support rod with Allen screw.
Version glassware set G5 (depending on coolant):
▪ Completely place the cold trap bracket into the lateral hole of the boss head
▪
clamp (2).
▪ Lock with the clamping screw.
▪
Place the cold trap bracket on the liner cold trap jacket.
▪
Position the liner cold trap jacket with the tension band on the cold trap bracket.
▪
Position the support rod (1) with an Allen screw.
Summary of Contents for Hei-VAP
Page 94: ...Service 94...
Page 95: ......
