Operation
34
Defi ne the shutoff response of the heating bath in the setup.
1. Select the menu element program „Setup” by turning the rotary pushbutton controller
Hei-GUIDE (6)..
2.
Select the entry „Bath Power at End” by turning the Hei-GUIDE (6) and call up the
selected entry to be changed by pressing the Hei-GUIDE (6) again.
The heating bath will not be switched off after the termination of the timer at the end
of the process „on” and will shut off if “off” is selected.
3.
Pressing it again confi rms the change.
4.
Select „accept (OK)“ to change the actual value display
Distillation parameters: Favorites
Up to 30 different data records can be stored.
A data record contains all parameters required for the respective process management
based on the modes..
Storing the data record
✓
The vacuum control is not activated.
✓
Parameters are set.
✓
You are in the menu view of a mode (SET pressure, AUTO easy, AUTO accurate,
gradient)
✓
Press softkey „Store Favorite“.
The entry is set to lowercase letters with element „abc”.
The entry is set to uppercase letters with element „Abc”.
The last character on the right side is deleted by briefl y pressing the
„delete” element.
1.
Select the letter by using the Hei-GUIDE (6) and combine a name by pressing the
Hei-GUIDE (6).
2.
Accept the name with softkey „Store Name“ (1) or discard the name with „Esc“ (1)
and interrupt the storage.
You will return to the menu view of the respective mode after saving.
Call up a data record (Menu favorites)
✓
The vacuum control is not activated.
1. Select the menu element „Favorites” by turning the rotary pushbutton controller
Hei-GUIDE (6).
2. Select the program name by turning the Hei-GUIDE.
3.
Call up the options by pressing Hei-GUIDE; the following options will be available:
▪
Apply
▪
Rename
▪
Copy
▪
Delete
Summary of Contents for Hei-VAP
Page 94: ...Service 94...
Page 95: ......
