- 15 -
The chamber will automatically heat up to 110 °C when the automatic
preheat setting is turned on. Please be careful of burns!
4.3.2
Automatic printing
Turn on the automatic printing function and the sterilizer is properly connected to the printer to
automatically print the sterilization record after the program ends. See section 6.5 for details
4.3.3
Extra drying
Additional drying settings based on user preferences, extend the drying time of the preset sterilization
program based on the drying time in Table 4‐1 to achieve good drying results for loads, especially cotton fabrics.
See section 6.6 for details.
4.4
Running a program
4.4.1
Start sterilization
After selecting sterilization program,pleaes press
to start up program.Sterilizer
will ensure that the door
is locked and the water quality of the distilled water is monitored after the start of the program.
Fig 4.2
starting program
4.4.2
Program running process
Sterilization program includes 3 phases,pre‐vacuum,sterilization and drying. The description of each stage is
detailed in section 1.7.1 of this manual. The controller monitors the operation of the sterilizer and the
temperature and pressure in the chamber in real time and displays relevant information on the screen.
07/25/2017 09:23:58
134 program
134
℃
/2.1Bar /5Min
T: 25.0
℃
P: 0.00Bar
Door status
Press
to
start program