- 12 -
Door open up operation
：
Please press
button at standby mode,you will see door lock icon will change
its status on the display to indicted the door is opened.
At this time, open the door handle on the right side of the
device upwards by about 90
o
C and then open the door outward.
Closing operation
：
Close the door of sterilizer
，
The door handle is turned down to the end
。
When closing the door, please press the door handle down to the
end. The strength required after using for a period of time may
increase
Don’t slam the door at any time.
Failure to comply with the above requirements may affect the
function and reliability of the door lock device
Open the door only when loading and unloading, Keeping the door
closed at other times is beneficial to energy saving
3.4
Distilled water injection
Inject qualified distilled water into the distilled water tank and make sure the water level is between the lowest
mark (MIN) and the highest mark (MAX). Always check the water level in the water tank and replenish distilled
water in time.
Fig 3.1 Inject distilled water
For the sterilizer with internal water tank, please discharge
waste
water tank every time before injecting distilled water.