- 8 -
Please carefully check the box and take out the device. If the
package is damaged or the equipment is damaged, please contact
an authorized dealer or logistics company immediately.
Please check the packing box and the random accessories inside
the sterilizer. A list of standard accessories can be found in section
1.1 of this manual.
2.2
Installation site requirements
This product should be placed in a dust‐free and dry environment
。
Surrounding
humidity is less than 85%,
Temperature between
5
o
C and 40
o
C.
Do not use or operate this product at a site where there is a risk of
explosion.
Countertop must be able to support the weight of this product
:
Q50B 59.6 kg; Q51B 61.6 kg;
Q70B 64.8 kg; Q71B 66.8 kg
Each surface of the device (except the bottom) must have a gap
of 10 cm outward. Too small a gap will result in heat buildup,
shorten the life of the equipment, reduce the performance of the
equipment and extend the running time of the program.
2.3
Device height adjustment
Take out air level and put it in the horizontal position at the top of the product and adjust the two foot pads at
the front end to make sure the front is higher than the rear side. The angle between the bottom of sterilizer and
countertop is around 5‐10°. It is beneficial to realize the drying of the loads and saves distilled water.
Fig 2.1 Device height adjustment
Rear end
Front end