HappyJapan HCS2 Instruction Book Download Page 198

Page: 198 / 354

-SA -94

1. When the machine is stopped, press

2. Select “REPORT”.

3. Select

4. In order to exit the mode, proceed to the

step 5.

If you want to delete the record, press

4. Press

The display returns to MENU.

19-1d

REPORT

22_4d O90

Record of thread break

This function will show thread break data of each needles.

In case of Multi-head embroidery machine, data line for each head will be displayed.

Press to return to Drive mode.

Needle number

Total

Head number

Save the report

You can save the displayed records in CSV format.

Insert the USB flash drive into the machine and press

key then, new folder

named “Production Report” will be made and the report data will be saved as file name

“BreakReport_*****”.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands