HappyJapan HCS2 Instruction Book Download Page 42

Page: 42 / 354

-DA -39

5_5 M20

5-5

PREPARATION OF PATTERN DATA

Read embroidery pattern data

Read the pattern to be embroidered from the memory media.

These types of memory media can be used.

This machine is able to read different kinds of memory media, which are generally used.

•USB flash drive

If you initialize the memory media with your PC, please proceed with FAT or FAT32 format.

Handling note of memory media.

Do not bend, drop, disassemble, charge or heat the memory media.

Keep away from humidity or direct sunlight.

To insert a USB flash drive

1. Insert the USB flash drive all the way into

the USB flash drive port of the machine (right

side of controller).

2. Read embroidery design data according to

following “Memory card reading” in the next

section.

To remove a USB flash drive

Please handle USB flash drive carefully.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands