HappyJapan HCS2 Instruction Book Download Page 122

Page: 122 / 354

-SA -53

1. When the machine is stopped, press

2. Select “NEEDLE”.

3. Press

from right submenu.

4. Press

The color change data will be saved into memo-

ry.

12-6

NEEDLE BAR SELECTION

13_5 NB01

Color change data registration

You can import and apply color change data from saved patterns (Including color change stops)

to the current pattern. This function lets you apply the same color change data from other pat-

terns.

The color change data is limited to one and the color change numbers are limited to 250.

Color change number

Press to return to Menu mode.

Press to return to Drive mode.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands