HappyJapan HCS2, Instruction Book

Page: 68 / 354

-SA -41
Starting to embroider
1. Press and move the frame to the
original point of pattern data by .
2. Press .
When you Press , the frame will start mov-
ing for the design trace. 10-4
Make sure that the pressure foot and needle
does not touch the frame.
When you Press
, the machine will stop.
Go on to step 4 if you want to start embroidering
without tracing first.
3. Press , the design trace fineished.
The cap frame will return to the original point.
There is a case that the upper part of the cap cannot
be embroidered satisfactory depending on shape of a
cap.
We recommend to change design position or reducing
size of the design.
Refer to the instruction book of “Happy Link” to reduce
the size of the design.
Embroidery
area
7-B
CAP FRAME (OPTION)
7_B Q701
Embroidery
area
:Original point (Start point)
Embroidery area (Max. *1)
180mm (Normal cap frame)
360mm (Wide cap frame)
You can confirm the outline
and position of design.
* The actual embroidery
area will be restricted by
the design and shape of
a cap.
67mm (Normal cap frame)
95mm (Wide cap frame)
Forward only when pressing
Frame move
Backward only when pressing
Pressure foot