HappyJapan HCS2 Instruction Book Download Page 49

Page: 49 / 354

-SA -27

5-C

PREPARATION OF PATTERN DATA

5_C O512

5. Press

6. Push "OK" to delete.

The item will be deleted.

To delete other patterns, repeat steps 3 to 6.

Press “Cancel” to cancel the delete.

The display will return to step 2.

Delete pattern? < 2>

Cancel OK

Showing number of delete design(s)

Press

to return to Menu mode.

Press

to return to Drive mode.

Erasing all patterns from memory

This is to erase alldesign data from the machine memory.

Pattern data can be erased if the lock is set.

1. When the machine is stopped, press

2. Select "PATTERN" while pressing the

and

3. Press

The item will be deleted.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands