HappyJapan HCS2 Instruction Book Download Page 115

Page: 115 / 354

-SA -51

11-D

PATTERNS IN MEMORY

11_D Q701

Searching pattern data

Searching of the pattern data stored in the machine memory is available.

1. When the machine is stopped press

2. Select “PATTERN”

3. Press

All pattern data stored in the machine memory

will be displayed.

Search from designated folder.

4. Press

In this keyboard for searching, all design names

are checked beforehand and only

candidate alphabets will be highlighted along

respective digits.

Display the folder name to search

The folder name which the pattern is saved

Cursor

Stitches

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands