HappyJapan HCS2 Instruction Book Download Page 187

Page: 187 / 354

-SA -88

6. Press

7. Press

The display returns to MENU.

9. Press

The machine will automatically connect with

HAPPY link LAN booted on the PC.

LAN connection indicator is displayed.

If LAN connection indicator is not displayed in the

screen, refer to the following causes and counter-

measures.

18-2c

OTHER SETTINGS

18_2c S117

LAN connection indicator

Causes and countermeasures

Is IP address overlapped on the machine with other machine that creates LAN connec-

tion?

If so, set IP address so that IP Address on each machine is not overlapped.

“HAPPY link LAN” is not booted.

If not booted, boot “HAPPY link LAN” on the PC. LAN is not recognized before HAPPY

link LAN is booted.

Is IP Address in “HAPPY link LAN” set correctly?

Set up the IP Address correctly based on the “HAPPY Link LAN” manual.

Are PC network settings set correctly? Set up the PC network settings correctly based

on the “HAPPY Link LAN” manual.

Press

at step 5.

Standard control box

10.4” Control box

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands