HappyJapan HCS2 Instruction Book Download Page 38

Page: 38 / 354

-DA -21

1. When the machine is stopped, press

2. Press

”OTHER”.

3. Press

Current year, month date and time is displayed.

4. Select year/month or time.

Press right /left of

to select the

setting point, and press up/down of

select the number.

To select the day,

select

the day of

calendar

directly.

5. Press

The date is fixed.

6. Press

to return to Menu mode.

Calendar and clock setting

Setting the calendar and clock lets the machine advise when oiling and other maintenance is

scheduled to occur.

TURNING THE MACHINE ON

5-2

3_6 RA01

Set day

Curren

day

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands