HappyJapan HCS2 Instruction Book Download Page 188

Page: 188 / 354

-SA -89

18-3

OTHER SETTINGS

Version information and software update

Software version installed in the machine is displayed.

Software can be updated to the latest version.

1. When the machine is stopped, press

2. Select “OTHER”.

3. Press

4. Confirm version number.

Press

to return to MENU screen.

The display returns to MENU.

When updating, insert USB flash drive

including update file into the controller and

press

22_3 O90

Preparation for update file

Contact your distributor to obtain the latest update file.

Use the appropriate update file for your machine.

Put update file in the root directory of USB flash drive.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands