HappyJapan HCS2 Instruction Book Download Page 71

Page: 71 / 354

-SA -37

8-2

ADJUSTING THE LASER POINTER (OPTION)

8_2 O901

Laser pointer indicates the needle position.

The beam of laser is coming from right upper side, thus the position of laser pointer can be

changed depending on the height of surface of fabric.

Please adjust then angle of laser pointer depending on thickness of fabric and type of frame

CAUTION: Laser beam (Class 1)

Do not stare into the beam.

1. For switch ON laser pointer, Press

and Press

on the submenu.

For switch OFF laser pointer, Press

2. Press

to return to Drive mode, and

press

and set a position of moving

head to needle No. 1.

3. Set fabric on the frame, then put white

paper to the position of needle and fix by

Scotch tape.

4. Press

and Press

5. Press

6. Press

to cancel "Jump".

7. Press

and keep until needle reachs to

the paper and make hole.

CAUTION: To prevent accidents.

The needle will penetrate the fabric.

Please keep your hands clear for your safety.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands