HappyJapan HCS2 Instruction Book Download Page 286

Page: 286 / 354

FCu701-6

HCH*, HCS*,

HCD*, HCU*

Shoe Clamp Frame

INSTRUCTION MANUAL

Program Ver. *1.60 ~

IMPORTANT SAFETY INSTRUCTIONS

Use this Manual together with Instruction Manual of embroidery machine for mounting this appliance and for

operating.

Use this appliance only for its intended use as described in this manual. Use only attachments recommended

by the manufacturer as contained in this manual.

Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

Do not pull or push fabric while stitching. It causes damage.
Do not modify this appliance.

SAVE THESE INSTRUCTIONS

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands