HappyJapan HCS2 Instruction Book Download Page 6

Page: 6 / 354

-SA -5

WARNING LABELS & THEIR LOCATIONS

1_2 M201

1-2

Trapping hazard

Shut the cover when starting the machine.
Do not put hands in while the machine is running.

Trapping, Puncture, Cut hazard wherever this
label is found

Shock hazard on all electrical components

Injury risk on moving head(s)

Keep hands away from the moving heads while the
machine is running.

Laser beam (Class 1)

Do not stare into the beam.

ES-HMF-5113-0

WARNING

Shut the cover when starting the

machine. Do not put hands in

while the machine is running.

Fear of serious injury.

ES-HMF-5117-0

CAUTION

Keep hands away from the

moving heads while the

machine is running.

Possibility of injury.

CAUTION: Injury risk on frame and carriage

Keep hands away from the drive

frame while the machine is

running.

Catch a finger in the X-carriage.

WARNING: Injury risk warning

for all needles

Keep fingers away from

the needles while

the machine is running.

Laser beam (Class 1)

CAUTION

Do not stare into the beam.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands