HappyJapan HCS2 Instruction Book Download Page 18

Page: 18 / 354

-SA -21

3_9b Q701

3-5

DRIVE MODE

Needle change

Change

Change the needle bar directly to the indicated

needle number on the button.

Change

Move the sewing head to the adjacent needle in

the direction of the arrows.

Although the needl bar setting has been done,

needle bar setting is changed and pressed

, following dialogue will be displayed.

Needle bar setting will be changed and

the display will return to Drive mode.

Needle bar setting will not be changed

and the display will return to Drive mode.

Pressure foot

You can raise or lower the presser foot .

Jump (Off)

The machine can embroider.

Jump (On)

Mchine becomes jump and the machine doesn’t

embroider.

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands