HappyJapan HCS2 Instruction Book Download Page 35

Page: 35 / 354

-SA -19

TURNING THE MACHINE ON

1. Connect the power cord to the inlet on the

right side of the machine.

2. Connect the power plug to an electrical out-

let.

3. Turn on the power switch.

Indicates the select frame.

Please confirm the emergency stop button has

been released.

Push the power switch firmly so it will remain on.

4. In case you do not need to change frame

type, Press

After the carriage and frame move slightly, the

embroidery frame will return to the previous posi

tion automatically.

Machine becomes ready for operation.

3_5 UC01

5-1

OFF

Power switch

CAUTION: To prevent accidents.

The embroidery frame and carriage will move.

Please keep hands clear for your safety.

Selected frame

In case you want to change frame type,

Press

When turning off the machine, Press

5-1c

CAUTION

The touch screen can be operated by finger,

but in some cases sensitivity of the screen will

be affected by condition of the finger.

In such cases, please use the fingertip or

built-in stylus to hit small touch targets.

How to turn on the machine

Summary of Contents for HCS2



































































































































































































































































































































































Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands

HappyJapan HCS2, Instruction Book

Search results

Summary of Contents for HCS2

Reviews:

Related manuals for HCS2

Brands by name

Popular brands