P/N 53063-30, Manual revision: B
4-6
Preparing for a Cell Saver 5+ Procedure
The Self Test screen display will indicate the stage of self test completion and
the current version of software installed in the device (CS5+-X.XX).
If a fault is detected by the safety system, a Notice message with appropriate
operator actions will be displayed as illustrated in the following example:
Figure 4-3, Example of a Self Test Notice message
Once the CS5+ system self test has been successfully completed, the
following information will be displayed:
Figure 4-4, Load Disposable screen message
At this point the operator can follow the instructions for loading the dispos-
able set as described in the section
Installing a Cell Saver disposable set.
The operator can also press the Help key and consult the installation list as
illustrated in
.
HNF_$F+DFR#AFNAI2#2FER:N[
O(8)(=#7&/=*&%
D,#%&)%4#)*&#)&8)`#'%&88#SFA"
D,#'%,.&&3#/0#JENHEG#5,3&`#'%&88#JIRF"
AFGC#DFAD
NID:+F
N(+-
O*&0#3/8',8(6-&#/8#-,(3&3`#'%&88#ADE2D
GIER#R:A$IAEQGF
2Q+
