P/N 53063-30, Manual revision: B
8-5
Using Data Acquisition Features
The current values of the recorded parameters will be displayed.
Note: The following information will also be displayed if the option was set
in the utilities menu: *EBL Patient (35%), **EPL Patient.
At this point the operator can choose among the following actions:
"
Press the Stop key to return to STANDBY mode.
"
Enter a patient ID number as follows:
!
Use the Select key to highlight the patient ID option and move
through the 10 digits of the patient ID.
!
Use the
#
Arrow keys [
!"
] to select each digit from 0 to 9.
"
Press the Start key to transfer the data to the output device connected
to the CS5+ device.
"
Press the Mode key to display the volume status after each cycle.
The following information will be displayed when the Mode key is pressed:
Figure 8-3, Example of the Procedure Volumes screen display
The
Proc
(Processed)
,
Wash
and
Reinf
(Reinfusion) are the volumes calcu-
lated at the end of each cycle.
Duration
is the time in minutes since the start
of the first cycle, updated at the end of each subsequent cycle.
Transferring procedure data
When the device is in the STANDBY state, the operator may also directly
transfer the recorded data to the configured output device as follows:
"
Press the No key.
!
1
9
;
>
$%,.
!1@>
!Lc9
1;99
9McL
;9ML
O(8*#T,-?5&
!>!1
11@9
9M!L
9BB1
>M9@
2&/0V
;c1
@11
B>@
LcM
!1;B
R?%()/,0
c!
!M@
!!1
!1!
!>B
$%,.&3?%&#b
!
$()/&0)#:R
M!L1!;;;@B
$%&88#ADI$#7*&0#V/0/8*&3"
$%,.&3?%&#T,-?5&8
