P/N 53063-30, Manual revision: B
4-5
Preparing for a Cell Saver 5+ Procedure
Explaining the power on procedure
When ready to initiate processing, the operator should:
"
Press the power on switch located on the right side of the CS5+
device.
If the device has been powered off for less than six hours, the CS5+ system
will provide the option of saving information as depicted in the following
message:
Figure 4-1, Example of a Power off recovery message
"
Press the Yes key to retain data collected prior to powering off the
device.
"
Press the No key to initiate a new procedure.
At this point, or if the device has been powered off for more than six hours,
the Self Test screen display will appear as depicted. The CS5+ system will
perform a series of internal diagnostic tests to ensure that all functions are
operating prior to each CS5+ procedure.
Figure 4-2, Example of a Self Test screen display
$,7&%#*(8#6&&0#,VV#V,%#!1#5/0?)&W8X
+,0)/0?&#)*&#'%&T/,?8#'%,.&3?%&Y
$%&88#SFA#),#Z&&'#'%&T/,?8#3()("
$%&88#NI#),#6&=/0#(#0&7#'%,.&3?%&"
$%&88#JIRF#),#&0)&%#8)()/8)/.8#5&0?"
$IOF2#ICC#2F+IKF2S
AFGC#DFAD#:N#$2I[2FAA
$%&88#JIRF#),#&0)&%#8)()/8)/.8#5&0?
<EA
+I2$I2ED:IN
+FGG#AEKF2
9M\
+A>]#^#_"__
