6-30
Figure 6-43 Installing the front I/O component in the front media module
8.
Insert the front media module in the front media module slot, and then use a screw to secure it
into place, as shown in
.
Figure 6-44 Installing the front media module
9.
Connect the front media module cable to the system board:
a.
Remove the factory pre-installed chassis-open alarm module. For more information about
the removal procedure, see "
Removing the chassis-open alarm module
."
b.
Install the chassis-open alarm module attached to the front media module. For more
information, see "
Installing the chassis-open alarm module
."
c.
Connect the front media module cable to the system board. For more information, see
"
Connecting the front media module cable
."
10.
Connect the external VGA and USB 2.0 cable to the front media module, and then fasten the
captive screws, as shown in "
