H3C UniServer R2700 G3, User Manual

Page: 130 / 226

7-47
Procedure
1.
Power off the server. For more information, see " Powering off the server ."
2.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
3.
Remove the access panel. For more information, see " Removing the access panel ."
4.
Remove the chassis air baffle. For more information, see " Removing air baffles ."
5.
Remove the air inlet temperature sensor:
{
On the 4LFF server, disconnect the temperature sensor cable from the system board. Then,
open the sensor retaining clasp and remove the temperature sensor, as shown in
Figure
7-57 .
Figure 7-57 Removing a temperature sensor (4LFF server)
{
On the 8SFF or 10SFF server, disconnect the temperature sensor cable from the system
board. Then, pull the temperature sensor out of the slot, as shown in
Figure 7-58 .
Figure 7-58 Removing a temperature sensor (8SFF/10SFF server)