10-4
Item Description
(12) Power supply
Supplies power to the server. It supports hot swapping and 1+1
redundancy.
(13) Riser blank
Installed on an empty riser card connector to ensure good ventilation.
(14) mLOM Ethernet adapter
Installed on the mLOM Ethernet adapter connector of the system board
for network expansion.
(15) Chassis ears
Attach the server to the rack.
(16) Front media module
Provides one VGA connector and two USB 2.0 connectors.
(17) Diagnostic panel
Displays information about faulty components for quick diagnosis.
(18) Drive
Drive for data storage, which is hot swappable.
(19) Drive expander module
Provides additional data channels for both front and rear drives.
(20) Drive backplane
Provides power and data channels for drives.
(21) Fan blank
Installed in an empty fan bay to ensure good ventilation.
(22) Fan
Supports hot swapping and N+1 redundancy.
(23) Supercapacitor holder
Secures a supercapacitor in the chassis.
(24) Supercapacitor
Supplies power to the flash card of the power fail safeguard module,
which enables the storage controller to back up data to the flash card for
protection when power outage occurs.
(25) Memory
Stores computing data and data exchanged with external storage.
(26) System board
The main printed circuit board that accommodates and interconnects
various server components, including processors, memory, BIOS chip,
HDM chip, PCIe connectors, and fans.
(27) Processor
Integrates a memory processing unit and a PCIe controller to provide
data processing capabilities for the server.
(28) Processor retaining bracket Attaches a processor to the heatsink.
(29) Processor heatsink
Cools the processor.
Front panel
Front panel view
show the front panel views of 4LFF, 8SFF, and 10SFF
servers, respectively.
