3-1
3
Installing or removing the server
Installing the server
As a best practice, install hardware options as needed to the server before installing the server in the
rack. For more information about how to install hardware options, see "
."
Installing rails
Install the inner rails to the server and the middle-outer rails to the rack. For information about
installing the rails, see the document shipped with the rails.
Rack-mounting the server
WARNING!
To avoid bodily injury, slide the server into the rack with caution for the sliding rails might squeeze
your fingers.
1.
Slide the server into the rack. For more information about how to slide the server into the rack,
see the document shipped with the rails.
Figure 3-1 Rack-mounting the server
2.
Secure the server:
If the server is installed with multifunctional rack mount ears, perform the following steps as
shown in
:
a.
Push the server until the multifunctional rack mount ears are flush against the rack front
posts.
b.
Unlock the latches of the multifunctional rack mount ears.
c.
Fasten the captive screws inside the chassis ears and lock the latches.
