3-8
Figure 3-10 Securing the AC power cord
c.
Slide the cable clamp forward until it is flush against the edge of the power cord plug, as
shown in
.
Figure 3-11 Sliding the cable clamp forward
Connecting the DC power cord for a –48 VDC power supply
WARNING!
Provide a circuit breaker for each power cord. Make sure the circuit breaker is switched off before
you connect a DC power cord.
To connect the DC power cord for a –48 VDC power supply:
1.
Connect the power cord plug to the power receptacle of a –48 VDC power supply at the rear
panel, as shown in
