GW Instek PEL-3000 Series, User Manual

Page: 123 / 257

FUNCTION MENU
121
4. Select Memory and select which memory
location to load for the selected step.

Settings loaded from the memory location will
be used for the selected step.

The same memory location can be used for
multiple steps.
Memory M001 - M256
5. Set the Run setting for the step.

By default RUN is set to Skip.

The Auto setting will automatically start and go
onto the next step.

The Manual setting will wait for the user to
press
Next[F2] before running the step.
Run Skip, Auto, Manual
6. Choose the On-Time in seconds.

The on-time setting determines how long the
load is turned on for the selected step.

The on-time is defined as the total test time
minus the off-time.
On-Time 0.1 - 60 seconds
7. Choose the Off-Time in seconds.

The off-time setting determines how long the
load is turned off between the end of the
current step and the start of the next step.

The off-time is defined as the total test time
minus the on-time.
Off-Time Off, 0.1 - 60 seconds
8. Choose the P/F-Time (pass/fail time) in
seconds.

The P/F-Time refers to the P/F delay time. This
delay time includes the 0.06 P/F start test time,
as shown in the timing diagram on page 119.