Grillo FD 1500 4WD, Use And Maintenance

Page: 80 / 88

FD1500 4WD ROUTINE MAINTENANCE GUIDE
General information
This table is intended to help you to keep your machine in good, safe working order. It lists the
main maintenance and lubrication procedures with the frequencies at which they are required;
alongside each one, you will find a series of boxes where you can note the date or the number of
operating hours when the procedure was carried out.
CAUTION! Perform the first general inspection after the running-in period, after the first 20-
30 working hours.
Change the engine oil and filter.
Then follow the table below:
PROCEDURE HOURS CHECKED (DATE OR HOURS)
1.1 Clean radiator and cooling grilles 4 / 8
1.2 Check engine oil level 8
1.3 Check hydraulic oil level 8
1.4 Check and clean engine air filter 8
1.5 Clean grass catcher grille 4 / 8
1.6 Check blade(s) fixing and sharpness 40
1.7 Check blade disengagement sensor 40
1.8 Check radiator liquid level 40
1.9 Check general safety devices 40
2.0 Check and adjust stop position 40
2.1 Check all fasteners 40
2.2 Check / replace deck gearboxes oil 300
2.3 Change engine oil and filter 130
2.4 Change air filter 260
2.5 Change fuel filter 130
2.6 Change hydraulic oil filters 500
2.7 Change hydraulic oil (running-in 500) 1000
2.8 Check tyre pressure 130
2.9 Check battery 130
3.0 Check PTO belt stretcher 130
3.1 Check turbine impeller 130
3.2 Check engine fixing 130
1) Refer to the engine handbook for the complete list and relative procedures.
2) General lubrication is strongly recommended whenever the machine is to be out of use for a
long period.
CAUTION!
Do not clean the machine with a high-pressure water cleaner; use this only for the deck, grass
catcher and grass intake duct.