Code 94
Copying
Model Copying Functions
26
C O P Y : F R O M M O D E L
K E Y 1 - 7 O R + / -
Code 94 permits copying model data form one model
to another one, and also via an external interface of a
transmitter to another mc-18 transmitter.
With the aid of a separately available PC adapter,
order N° 8181, it is also possible to transfer either
individual model adjustments data or the complete
contents of the memory of the transmitter (all models)
into a personal computer compatible with industrial
standards via the serial interface of the latter, saving it
there on a disk for possible re-transfer to the
transmitter (or some other transmitter).
A special cable, order N° 4180, will be required for
the transfer to another mc-18 transmitter, which has
to be plugged into the connection socket for the
PROFITRIM module of both transmitters.
After activation of code 94, the transmitter expects the
input of the model memory of which a copy is to be
produced. This is achieved either by input of the
model number or by skimming through the list of
models using the
INC
and
DEC
keys. The selection
is then made by pressing the
ENTER
key. Then the
model memory, into which the copy is to be produced,
is selected in the same manner. The copying process
is triggered by pressing the
ENTER
key, with all
previously stored data being transferred to the model
memory, into which the data is copied. If the name of
the model the data of which is being copied has been
entered, this name will also be transferred to the
copy, but with a + symbol added to the last letter of
the name to distinguish it from the original.
For safety’s sake, model memories that are active at
the moment must not be copied!
When copying from one transmitter to another, or to a
personal computer, selection is performed by keys
INC
and
DEC
, with “external interface” for source
at the receiving transmitter, and as target for the
sending transmitter. In addition, the “all-models
memory” option is available, which permits
transferring all model memories simultaneously. In
that case, the options of both units have to be set
accordingly. The transfer process should be initiated
by the receiving unit via the
ENTER
key, followed by
the sending one.
Copying between two mc-18 transmitters
Using the programming interface mc-18/mc-18 (order
N° 4180) single model and all models memories can
be copied between two mc-18 transmitters. For
example, please refer to pages 54/55.
In the case of transmitters with the extended memory
(for 30 models), on deletion (code 56) and when
copying (code 94) a back-up copy of that memory will
be made onto which the copy is transferred or which
is being deleted. This permits reversing accidental
deletion or overwriting of model adjustments, this
back-up copy being copied onto a normal memory
station. Just call code 94 as usual and input “from
model” memory station 31. For copying examples
between two mc-18 transmitters refer to pages 54/55.
Data Exchange to and from Personal Computers
Precise instructions are given in the disk included in
the programming interface mc-18/PC (order N° 4181).
Summary of Contents for mc-18
